Cisco IP Phone 8800 Series User Guide Your Phone Cisco IP Phone 8800 Series

Table of Content

• Secure the Phone with a Cable Lock
• Using a Cisco VoIP phone at home
• How do I connect my Cisco phone to my network?
• New and Changed Information for Firmware Release 12.1(
• How do I install a Cisco IP phone on my laptop?
• How do I remotely access my Cisco phone?

The phones support many functions and features, depending on the call control system. Your phone may not have all functions available, based on the way your administrator has set up the phone. You can use Cisco Extension Mobility to sign in to a different phone in your network and have it act the same as your phone.

These three large buttons are located to the left of the keypad. Cisco IP Phone handsets support third-party inline amplifiers. You attach an amplifier to the handset and cord and it sits between the handset and the IP phone. When the phone is in the idle state, you can also view the Recent calls list by pressing the Navigation cluster up.

Secure the Phone with a Cable Lock

VoIP phones use voice over internet protocol technology to deliver an internet based telephone service. You can see your missed calls by selecting a line key to view the missed calls for that line in the call window. The missed call counter clears when you return to the idle screen. Firmware release 12.6 introduced an improved Session line mode.

But this process could be different depending on the provider you’re using, so make sure to closely follow the setup instructions. Sometimes your phone loses its connection to the phone network. When this connection is lost, your phone displays a message.

Using a Cisco VoIP phone at home

Only one call can be active at any time; other calls are automatically placed on hold. Lines—Each line corresponds to a directory number or intercom number that others can use to call you. You have as many lines as you have directory numbers and phone line icons. Depending upon how your phone is configured, you could have up to 16 lines. The bottom row of the screen contains the softkey labels.

Step 6 If the old phone had a PIN assigned, enter the PIN. You wants a different phone model from their current model. Contact your administrator if you don't know your code or if you need a new one.

How do I connect my Cisco phone to my network?

We use the latest version and have high speed internet but it gets choppy. Or a small router pehaps with embedded adsl / cable / wirelss interfacse like the 850 or 870 be nice. For example the new ASA 5505 that is small and has POE so the phone doesn't need the power brick. Your other option is to install a firewall / router on your home office LAN that can create a LAN to LAN VPN tunnel back to the head office. Without this VPN tunnel, the 7942 can't communicate with CUCM, and hence will never work.

But the Cisco IP Phone 8865NR does not support Wi-Fi. Step 3 Adjust the footstand on the key expansion module and ensure that the phone and key expansion module are stable. You should save the box and packaging for the Cisco IP Phone 8845, 8865, and 8865NR.

For example, your softkeys might not work as you expect. Features, such as speed dial, line status, privacy, do not disturb , and service URLs, can be assigned to feature buttons. Soft keys are a feature of modern voice over ip phones.

To connect to your corporate network when you are working away from your office. You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password. Your administrator needs to configure settings on the call control system to enable Wi-Fi access. Virtual Private Network —Your phone connects to a protected network. The Cisco IP Phone 8800 Series The following table shows the major hardware features of the Cisco IP Phone 8800 Series.

How do I install a Cisco IP phone on my laptop?

Examples of additional digits include a meeting access code, an extension, a voicemail password, an authorization code, and a billing code. I use both Communicator and 7960 at home using a IOS router/vpn. I do have priority queing enabled on the router for voice and believe this helps alot. I would say that the ip phone is perhaps better but with the limited QOS option I have great audio at least 99% of the time running on cable modem.

When you turn on Mute, your phone beeps once; when you turn off Mute, your phone beeps twice. For locales that read right to left, such as Arabic, session buttons are on the left and the line and feature buttons are on the right. The handset light strip flashes during incoming calls and stays lit when a voicemail message is received. Bluetooth connections work best when you're within 3 to 6 feet from your phone, but you might be able to be as far away as 66 feet . The Bluetooth connection can degrade if you have a barrier , large metal object, or other electronic devices between your phone and the connected device. This feature is supported on speed dial, call history, and personal and corporate directories.

The Cisco IP Phone 8800 Series provide accessibility features for the blind, and the visually-, hearing-, and mobility-impaired. Because many of these features are standard, they can be used by users with disabilities without requiring any special configuration. For example, your phone can support five USB devices on the side port and five additional standard USB devices on the back port.

Activation happens once for your phone, and connects the phone to the call control system. Your administrator gives you your sign-in and activation credentials. Also, we have a 100MB internet connection to the concentrator but the voice is still "cracking". Typically this is set a couple of places, one the VG needs to be made aware as well as callmanager.

Sign In to Your Extension from Another Phone

Adjust the handset, headset, and speakerphone volume and the ringer volume . When adding features to the phone line keys, you are limited by the number of line keys available. You cannot add more features than the number of line keys on your phone.

How to set up a VoIP phone at home

Table of Content

• Cisco IP Phone 8800 Series Wall Mount Kit Accessibility
• Contact Cisco
• How do you hook up a Cisco phone?
• How do I connect my Cisco phone to my network?
• Phone Screen Features
• New and Changed Information for Firmware Release 11.0
• Phone Firmware and Upgrades

I have a cisco catalyst switch with voice vlan configured on it, this extends on the router which correctly let the phone get an address via dhcp. VoIP users have more options than ever in 2020, so check out our guide to best VoIP services for more information on the top providers. These brands cater to everything from sole proprietorships and small businesses to large-scale enterprises with tens or hundreds of lines. Power Save Plus—Your phone screen turns on and off at times that are based on your work schedule. If your work hours or work days change, you can contact your administrator to reconfigure your phone.

Be careful which cisco phone you get, the pre standard POE ones won't work unless your POE switch supports Cisco pre-standard POE. If your phone is active, it waits until it has been inactive for a set interval before it notifies you of the pending power shutdown. Power Save—The backlight or screen turns off when the phone is inactive for a set interval.

Cisco IP Phone 8800 Series Wall Mount Kit Accessibility

Con is the additional bandwidth each call will consume due to IPSEC overhead (a G.711 call can take up to 100k of bandwidth). You are best configuring the phone in a region that uses G.729 - but ensure you have transcoding resources available. Cisco claims that a patch will be available in January 2023 but has not yet published any security upgrades to address this flaw. Cisco Discovery Protocol can be disabled on impacted IP Phone 7800 and 8800 Series devices by administrators.

Line buttons—Used to answer a call or resume a held call. When not used for an active call, used to initiate phone functions, such as the missed calls display. Phone features include speed dial, do not disturb, and your personal address book. If your network has been configured to support this feature, then you can use Activation Code Onboarding to connect to your company's phone network.

Contact Cisco

You will need a routers / firewalls capable of setting up the VPN tunnel obviously. It is also desirable that the routers / firewalls can do elements of QoS over the tunnel. Manually configure the phone's TFTP server, to point to the CUCM TFTP IP. As long as there is IP connectivity, it wouldn't matter what IP address as long as it's unique, or natted to be unique, when it attempts to register with CUCM.

As I understand this device its just to convert analog devices to work on a network with a PBX. Not going to work unless you build a sip server and buy the fxo card.. You can get a poe injector for 9$ on ebay or use the power adapter that comes with your phone. That may work, as far as I can tell those adapters are to allow analog devices to act as ip devices. He’s particularly interested in the way seemingly small adjustments can transform a person’s financial outlook. If you’re setting up VoIP at home, you shouldn’t have to worry about the strength of your connection.

How do you hook up a Cisco phone?

After you sign in, the phone adopts your user profile, including your phone lines, features, established services, and web-based settings. Your administrator sets you up for the Cisco Extension Mobility service. Your phone might not have all functions available, based on the way your administrator has set it up. Voice Feedback helps people vision problems to use their Cisco IP Phone. When enabled, a voice prompt helps you navigate your phone buttons, and to use and configure phone features.

If your phone supports Bluetooth, use a Bluetooth headset and connect your mobile phone or tablet to the phone. When you add features to your phone, some features require a line button. But each line button on your phone can support only one function . If your phone's line buttons are already in use, your phone does not display any additional features. Plug one end of an ethernet cable into the white jack, and the other end into the ethernet port on the back of the phone device. First, disconnect the Ethernet cable from the computer and attach it to the network port on the back of your phone.

The end point at the home users place would simply need to be put behind a tunnel, with path back into the infrastructure.

First, you must take your Ethernet cable and plug each end into the respective port on both your laptop and your VoIP phone. You’ll find a power port and two additional ethernet ports behind your VoIP phone. One is made for a PC connection and the other for Ethernet, make sure to not get those mixed up. In this document, the term phone support pages refers to the web pages that users can access to set up certain features.

If you move the phone, we recommend that you pack the phone into the original box to protect the camera. For more information, see Protect Your Video Phone Camera. If I make a local call it goes out the FXO card, if I make a ld call it automatically grabs the sip account and uses that. The cisco phones like to use skinny, which requires call manager to tell the phone what to do. The server is setup for all local to go out the analogue and out of town goes out the sip account. But w/ asterisk it seems like the yealinks are pretty much perfect...

Next, use the Ethernet cable included with your phone to connect the access port on the back of your phone to your desktop computer. Your Cisco IP Phone now shares a network connection with your computer. Companies that have Cisco Expressway will be able to bring Cisco 7800 and 8800 series phones home.